![]() ![]() If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. Color fading and slight natural graying of the wood may occur during the warranty period, especially in areas exposed to heavy foot traffic or excessive weather. ![]() THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. For optimum performance, coat all six sides of the wood.īehr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for 25 years on vertical surfaces and 10 years on horizontal surfaces, from the date of purchase.Over application of stain will lead to surface failure including peeling and cracking. Always back-brush and apply product end to end or to board lengths to prevent lap marks.If thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.Airless spray is recommended for experienced applicators only use a. Use a 3/8” nap roller, nylon/polyester brush, pad applicator or airless sprayer.Stir product occasionally throughout application.Intermix multiple containers to ensure color uniformity. 436 Exterior Multi-Surface Primer & Sealer. However, Redwood, Cedar, Cypress and other "bleeding" woods contain water soluble extractives which may cause discoloration of white and pastel colors therefore prime the above type woods with one coat of a product such as BEHR PREMIUM PLUS® NO. The wood surface must be completely dry before application. Coating will resist rain after 4 hours. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |